Hitachi VT-MX431A Manual

A SERVICE OF

next previous

CONNECTING TO INPUT JACKS

26

CONNECTING TO INPUT JACKS

When you copy a video tape, or watch a program recorded on an another source, use the

audio/video input jacks.

INPUT SELECT

1) The "PWR." and the "VCR" indicator must appear on the VCR's digital display.

2) Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back

of the VCR to match the channel selected on the TV.

3) Connect the audio/video cables to the audio/video input jacks on the back of the VCR. Now

connect the other end of the cables to the audio/video output jacks on the source.

4) Press the CHANNEL (CH) or button to select "AUX", which will appear on the TV

screen or "AU" on the digital display of the VCR.

You may also select the "AUX" setting by pressing "00" with the number buttons on the remote

control.

Note: "AUX" is found before the lowest memorized channel. (Example: CH2)