1 XB-06329-1 1 Hex hd. cap screw 5/8˝ -11 x 4.25˝
† 2 XB-09495 1 Spring
3 XD-06328 1 Adjusting wedge
4 XB-06179-2 1 Locknut 5/8˝ -11
5 XB-06330 1 Plunger spring
† 6 XA-09417-1 1 Locking plunger
† 7 XE-09415 1 Cam arm
8 XA-08162 2 Roller
9 XB-08558 2 SHCS 1/2" -13 x .75”
10R
**
XA-09580 1 Right hand release arm
10L
**
XA-09514 1 Left hand release arm
11R-3** XB-09629 1 3˝ Extension spring
11R-6
**
XB-09581 1 6˝ Extension spring
† 11L
**
XB-09408 1 Spring
12R** XA-09632 1 Right hand release handle
† 12L
**
XA-09484 1 Left hand release handle
13 XB-T-199 1 5/8˝ washer
14 XB-06336 1 Cotter pin .19˝ x 1.25˝
† 15 XA-09416 1 Hinged lock
16 XA-06344 1 Lock pin
17 XB-5 1 Cotter pin .25˝ x 2˝
18 XB-08764 1 Lock return spring
19
XB-21-S-500-2750
1 Roll pin
20 XA-09558 1 Spacer
21 XB-1108 1 Washer
22 XB-C-38-C-214 1 HHCS, 3/8˝ x 2.25˝
23 XB-09517-1 1 Extension spring
24 XB-H-38 2 Grease fitting
25 XB-T-69-A 2 Locknut 1/2˝ -20
26 XB-C-95 2 Hex hd. cap screw 1/2˝ -20 x 1.25˝
27 XA-09590 1 Wedge stop block
* 28 XA-06349 1 Manual secondary lock arm
* 29 XB-767-C 1 45° grease fitting
* 30 XA-1016-C 1 Secondary lock pin
* 31 XB-5 1 Cotter pin .25” x 2” (same as #17)
* 32 XA-06345 1 Secondary lock release handle
* 33 XB-1204 2 7/16” washer
* 34 XB-1028-1 1 Spring
* 35 XB-06377 2 Cotter pin 1/8” x 1”
* 36 XB-PWC-38-78 1 Washer, 3/8” clipped
* 37 XE-06356 2 Bracket pin
* 38 XB-0011-2 2 Rubber bushing
* 39 TF-TLN-08284 1 Helper block (wood)
* 40 TF-TLN-4000 1 Helper block (steel)
* 41 TF-0110 1 Kingpin gage
* 42 TF-TLN-5001 1 2” lock adjustment tool
8
FW8 (XA-201) FIFTH WHEEL
Trouble-Shooting Guide
ITEM PART NO. NO. PART NAME ITEM PART NO. NO. PART NAME
*
Not included in Rebuild Kit
†
These parts must be installed as a complete set and cannot be ordered individually
**
Not available individually; contact local Holland representative for correct handle kit.
