A SERVICE OF

logo

Rev 2.00 9 Document 900.0399
03/06
Connecting the Power Cord
1. Connect the DC power cord of the adapter to the DVR.
2. Connect the AC power cord to the adapter and then to the wall outlet.
Your DVR is now ready to operate. See Chapter 3, DVR Configuration and Chapter 4, Front
Panel Operation for more information.
WARNING! Route power cords so they are not a tripping hazard. Make certain
the power cord will not be pinched or abraded by furniture. Do not
install power cords under rugs or carpet.
The power cord has a grounding pin. If your power outlet does not
have a grounding pin receptacle, do not modify the plug.
Do not overload the circuit by plugging too many devices into one
circuit.