17
17
The indoor temperature and humidity with the icon IN are located below the
remote temperature and humidity information line.
NOTE
: If the indoor or remote temperature or humidity goes above or below
operating range stated in specifications, the main unit’s display ( weather) will
show dashes “- - -” on the corresponding line.
AUTO-SCANNING
Press and hold the CHANNEL button for 2 seconds – the icon “3” will
appear on the main unit display to the left of the COMFORT LEVEL indicator.
All three remote channels data will be displayed one-by-one automatically with
11 seconds delay in the following sequence: Channel 1, Channel 2 and
Channel 3.
To exit from scanning mode, press and hold the CHANNEL button for 2
seconds, and the icon “3” will disappear, returning the main unit display to the
default display mode.
PROGRAMMABLE TEMPERATURE ALARM
This product allows manual programming of a HIGH and LOW temperature
alarms for all three remote channels at the same time. Once the actual remote
temperature will reach the pre-set high or low limits, the alarm will sound. The
alarm can be set for temperature readings between -58 °F and 158°F.
To program the temperature alarm for all three remote channels,
• Press the TEMP ALARM button once to enter into the High
Temperature Alarm programming mode – the abbreviation “OF” with
the high temperature limit symbol ( ▲) will be displayed on the remote
temperature line
• Press and hold TEMP ALARM button until the abbreviation “OF” will
18
flash
• Use UP( ▲) or DOWN(T) arrow buttons to adjust the higher
temperature limit
• Press the TEMP ALARM button to confirm the selected value
• Press the TEMP ALARM button once to enter into the Low
Temperature Alarm programming mode – the abbreviation “OF” with
the low temperature limit symbol (T) will be displayed on the remote
temperature line
• Press and hold TEMP ALARM button until the abbreviation “OF” will
flash
• Use UP( ▲) or DOWN(T) arrow buttons to adjust the lower
temperature limit
• Press the TEMP ALARM button to confirm the selected value
COMFORT LEVEL INDICATORS
This product is capable of detecting and displaying the current indoor comfort
levels of surrounding environment. The comfort level is displayed in the
weather station portion of the main unit’s display. It is based on the combination
of the current indoor temperature and humidity readings. There are following
comfort levels may be displayed: COMFORT (comfortable); WET (wet) and
DRY (dry)
Indicator
displayed
Temperature
Range
Humidity
Range
Shows current
condition
COMFORT
20°C to 25°C
(68°F to
77°F)
40%RH-
70%RH
Ideal for both relative
humidity and
temperature
