JVC DLARS46 Manual

A SERVICE OF

next previous

RemoteCode

Forchangingtheremotecontrolcode.



Youneedtoconfiguretheremotecontrolaccordingtothesettingsofthisunit.

Ontheremotecontrolunit,pressthe[MENU]and[BACK]buttonsatthesametimeforthreesecondsorlongerto

switchthecode.



Thebacklightoftheremotecontrolblinks3times:changetheremotecontrolcodeto“A”



Thebacklightoftheremotecontrolblinks2times:changetheremotecontrolcodeto“B”

Setting Description

A Changetheremotecontrolcodefrom“B”to“A”.

B Changetheremotecontrolcodefrom“A”to“B”.

LampReset

Forresettingthelamptimeto“0”.

¨“ResettingtheLampTime” p.67

GlossaryofNetworkTerminology

DHCP : AbbreviationforDynamicHostConfigurationProtocol.Thisisaprotocolforthenetwork

toassignanIPaddressautomaticallytotheconnecteddevice.

IPAddress : Numericcharactersforidentifyingthedevicethatisconnectedtothenetwork.

SubnetMask : Numericcharactersthatdefinethebitcountusedforthenetworkaddressthatisa

segmentoftheIPaddress.

DefaultGateway : Serverforcommunicatingbeyondthenetworkthatisdividedbythesubnetmask.

MACAddress : AbbreviationforMediaAccessControladdress.Thisisanumberthatisuniquetoeach

networkadapter.EachofthenetworkadaptersisassignedwithauniqueMACaddress.

63

Adjust/Set