The individual items are selected using the
buttons. If you require to access submenus, they can be called up
using the
button. Changes to the current settings can be made using the
buttons or the numeric keypad.
Satellite 1
Select “Satellite 1:***” eld and press the
button
to allow you to make the settings/selection for the rst
satellite.
The following display appears:
Satellite and position:
Select here the satellite you desire from the available
satellites. By pressing the
button at this point you
can view a list of the satellites saved in the receiver.
Use the
buttons to select the satellite you want and
conrm your selection with the
button.
Tuner 1
Select “Tuner 1” eld and press the
button to allow
you to make the settings for the rst tuner.
The following display appears:
Number of Satellites
State here the number of satellites received in the signal
at tuner 1. A maximum of four satellites can be received
at one tuner.
