DP-R7090/R6090 (En)
18
The following procedure allows to record a CD within the
specified tape length so that no music is interrupted in the
middle at the ends of sides A and B.
Editing
Preparation
1
Light the “EDIT” indicator.
÷Load a disc in the CD player.
÷Check that the unit is in the normal play
TRACK mode.
!
: Keys and control used in the operations described on this page.
REMOTE CONTROL UNIT
RC-P0601
Select the disc.
2
EDIT
Do this operation in the stop mode.
Go to step 2 within 8 seconds.
If more than 8 seconds have elapsed,
press the key again.
REMOTE CONTROL UNIT
RC-P0601
REMOTE CONTROL UNIT
RC-P0601
DISC SELECTOR
12
3
4
5
Go to step 3 within 8 seconds.
3
Press the numeric keys as shown below.
30-minute tape : 000)
46-minute tape : 00006
÷Recording within 99 minutes can be specified in minutes (2 digits).
÷If you commit a mistake in time entry, press the P.MODE key and
restart the procedure from the beginning.
÷By pressing the TIME DISPLAY key the set time-length intervals will
change in this order:
÷The interval length can be adjusted with the skip keys 4 and ¢ in
units of one minute (to a maximum of 99 minutes).
÷Automatic editing is executed for side A and side B,
Enter the recording time of the tape.
When using the numeric keys:
When using the TIME DISPLAY key:
REMOTE CONTROL UNIT
RC-P0601
TIME
DISPLAY
EDIT
2 Set the entry.1 Select the time.
REMOTE CONTROL UNIT
RC-P0601
12
3
45
6
78
9
0 +10
➡
"
46=54=60=74=90=??
"
=
Blinks.
