HOW TO USE THE BUILT-IN TIMER
● Before setting the timer, make sure that the clock setting is correct.
● The start time and stop time, which are set with this operation, will be kept in memory until the AC power cord is
unplugged or the setting is changed.
The timer is set as follows.
In our example, we set the timer mode, the start time, and the stop time, as described in STEP 1 and STEP 2.
● The stop time setting display will appear.
● The “hours” display will be automatically increased one hour.
■ To select the timer mode (playback/recording)
(STEP 1)
1 While in the stop mode, press the TIMER button, and then
select "TIMER SET" using the jog dial.
2 Press the ENTER button, and then select "TIMER PLAY" or
"TIMER REC" using the jog dial.
3 Press the ENTER button.
● The start time setting display will appear.
Go on to the next step.
■ To set the start time and the stop time (STEP 2)
4 Enter the “hour”, using the jog dial. Then, press the ENTER
button.
5 Enter the “minute”, using the jog dial. Then, press the ENTER
button.
● The stop time setting display will appear.
6 Enter the “hour”, using the jog dial. Then, press the ENTER
button.
7 Enter the “minute”, using the jog dial. Then, press the ENTER
button.
● The start and stop times are now set.
Select timer playback or timer
recording.
STEP 2 Setting the timer
Set the start time and stop time for
the timer.
STEP 3 Using the timer
Activate the timer so that timer play-
back or timer recording will begin at
the time you want.
STEP 1 Selecting the timer mode
NAME/TOC EDIT
DISPLAY/CHARACTER
DELETE/CLEAR
TIMER
ENTER
7
6
AM
AM
AM
5
4
3
2
1
AM
AM
AM
AM
AM
(Timer playback mode)
(Timer setting mode)
(Timer recording mode)
MD-R2
31
