22
■ Playback
To play back a recorded conversation, memo, or message:
1 Press the key programmed as Playback or access the Menu {page 9}.
• If the last action on your transceiver was to auto record your conversation,
“STORE?” will appear on the display, otherwise a recording channel with the time
of the recording will appear.
2 Press / to select the channel you want to play.
• “AR” represents auto recorded conversations, “RM” represents auto reply
messages, and “VM” represents voice memos.
3 The transceiver will announce the time and channel, then the recording will
play back.
• When the entire recording has been played, “END OF MESSAGE” is displayed.
You can also end the recording at any time by pressing .
• To delete the selected recording, press
. To clear all the recorded data, press
and hold .
voice guide
When changing the zone and/or channel, an audio voice will announce the new
zone and channel. Additionally, when changing a function setting, the new setting
will be announced.
Note: Voice announcements vary by dealer setting.
