Installing the printer driver
4
IC-205 4-7
Installing the printer driver Chapter 4
Installing the TWAIN driver/printer driver using “Plug and Play” under
Windows Me/98 SE
1 With Windows running, insert the CD-ROM into your computer’s CD-
ROM drive.
2 Turn on the machine.
3 When the machine is ready, connect it to the computer with the USB
cable.
The “Add New Hardware Wizard” dialog box appears and installation
of the TWAIN driver begins.
4 With Windows Me, select Specify the location of the driver (Ad-
vanced).
With Windows 98 SE, click [Next], and then select Search for the best
driver for your device. (Recommended) in the dialog box that ap-
pears.
5 Click [Next].
6 Select Specify a location, and then click [Browse…].
7 Browse to “Driver\(language)\Win9x” on the CD-ROM, and then click
[OK].
Select the language you prefer. For example, if you prefer English,
browse to: Driver\English\Win9x
8 Click [Next], and then follow the instructions that appear on the screen
until you can click [Finish].
9 Click [Finish].
This completes the installation of the TWAIN driver. The “Add New
Hardware Wizard” dialog box appears again. Next, install the USB
printing support driver.
10 Repeat steps 4 through 9 to install the USB printing support driver.
The “Add New Hardware Wizard” dialog box appears again. Next, in-
stall the printer driver.
11 Repeat steps 4 through 9 to install the printer driver.
