A SERVICE OF

logo

13
Preparations
4
Pass the other end of the
band outward through
band xture B.
Take care not to twist
the band.
2) Connecting the probe
Connect the probe’s connector
plug into the Probe Connector
on the instrument.
Make sure that probe’s
connector plug is oriented
correctly.
Do not connect it in with
excessive force. Doing so may
damage the connector.

Do not touch the connector
terminals by hand. Contact
failure may occur.
Band xture B
5
Fold back and secure
the band with the hook-
and-loop tape section.
When attaching the
instrument to an arm,
adjust the band length
and fitting at this hook-
and-loop tape section.
Extension Cable EC-300 (1m)
*Connecting the extension cable
EC-300 between the PULSOX-300
and the probe extends the probe cable
to a total length of 1m.