A SERVICE OF

logo

69
ADDITIONAL FEATURES
If the • button is pressed, the lamp on the front of the camera will blink once and
take the picture.
If the 2s button is pressed, the lamp on the front of the camera will blink for two
seconds before the picture is taken.
To cancel, reset the drive-mode, press the program-reset button, or turn the camera
off.
Remote emitter
2s Button
Button
Arrange the camera and subject
positions, and compose your pic-
ture.
4
Point the remote emitter toward
the front of the camera and press
the • or 2s button.
5