KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-419 Video To SXGA/HD Scaler
4
5 Connecting the VP-419 Video To SXGA/HD Scaler
Connect your VP-419, as the example in Figure 2 illustrates
1
:
1. Connect an s-Video source (for example, an s-Video camcorder) to the
s-VIDEO INPUT 4p connector.
2. Connect a composite video source (for example, a composite video player)
to the VIDEO INPUT RCA connector.
3. Connect a component video source (for example, a DVD player) to the Y,
Cb and Cr INPUT RCA connectors.
4. Connect a VGA graphics source to the PC IN INPUT HD15 connector
2
.
5. Connect the RGB / YPbPr OUTPUT HD15 connector to a video acceptor
(for example, a plasma display)
6. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in this illustration).
Composite
Video Player
s-Video
Camcorder
Figure 2: Connecting the VP-419 Video To SXGA/HD Scaler
1 You do not have to connect all the inputs, connect only those that are required
2 This PC input signal is not scaled, but is available for pass-through when the PC Source is selected
