Function
20
Function
PICTURE Menu Options
* In this manual, the OSD(On Screen Display) may be different from your Projector’s because it is just an example to
help with the Projector operation.
* This operating guide explains operation of RGB(PC) mode mainly.
1. Press the MENU button. Then, move to PICTURE with the ,,,
buttons and press the OK button.
2. Move to a sub-item with the button. Then, use the , buttons to
move to a desired function and press the
OK button.
3. Use the , buttons to make a desired adjustment and then press the
OK button.
●
You can set image values differently for each input and Picture Mode.
●
Saving after making adjustments will display (User) in adjusted Picture
Mode. (except Expert 1/2)
●
Execute Picture Reset for Picture Mode to restore back to default factory
settings.
●
You can adjust contrast by pressing the button on the remote control.
●
You can adjust brightness by pressing the button on the remote control.
●
Press the MENU or EXIT button to exit the menu screen.
Adjusting Video
1. Press the PICTURE button on the remote control.
2. Press the
, button to adjust the screen condition as you want.
Picture mode
* Use Picture mode function to set the projector for the best picture appearance.
●
Each press of the , button changes the screen as shown below.
●
You can use this function through the MENU button.
●
To exit the menu display, press the EXIT button.
OK
Move
PICTURE
Picture Mode : Standard
• Contrast 50
• Brightness 50
• Sharpness 70
• Color 70
• Tint 0
• Picture Reset
RG
FF
Vivid
GG FF
Standard
GG FF
Cinema
GG FF
Sport
GG
FF
Expert2
GG FF
Expert1
GG FF
Game
GG
