6
Safety Instructions
Installation Instructions
Operating Instruction
Troubleshooting Tips
Customer Service
INSTALLATION INSTRUCTIONS
Installation clearances
The location must be large enough to fully open the
dryer door.
Dryer Dimensions
* Most installations require a minimum 5
1
/
2
in.
(14 cm) clearance behind the dryer for the
exhaust vent with elbow.
Minimum installation spacing for a recessed
area, customized undercounter or closet
installation
The following dimensions shown are for the
minimum spacing allowed.
■ Additional spacing should be considered for
installation and servicing.
■ Additional clearances might be required for wall,
door and floor moldings.
■ Additional spacing of 1 in. (2.5 cm) on all sides of
the dryer is recommended to reduce noise
transfer.
■ For closet installation with a door, minimum
ventilation openings in the top and bottom of the
door are required. Louvered doors with
equivalent ventilation openings are acceptable.
Companion appliance spacing should also be
considered.
Closet installation - Dryer onlyCloset installation
