53
7. Click the search icon.
The smart search data is displayed.
8. Select the channel from the list.
9. You can play the searched data using the play-
back control buttons.
Remote Setup Mode
Remote Setup Mode
You can set the DVR of a selected site name in the
remote setup tab via the network.
Camera / Display Setup
Camera Setting
1. Select a channel for settings.
If you want to block a channel from other users,
mark up the convert option. The marked up chan-
nels are displayed “Video Loss” on the live win-
dows for POWER or NORMAL user.
2. Enter the new channel name.
3. Select input audio channel.
4. Set the PTZ control options.
• Port: Select the connected data port of the
RS-422/485 terminal on the rear panel.
• Control ID: Select the PTZ camera ID from 0
to 255. Make the same settings as the PTZ
camera.
• Protocol: Select the protocol supported by
PTZ camera.
• Baud Rate: Select the communication
speed.(1200, 2400,4800,9600,19200 or
38400)
5. Set the motion options.
• Sensitivity: Set the sensitivity level for the
created motion detection area. Sensitivity can
be set from 0 to 10.
• Alarm Out: Select the number of the
ALARM-OUT terminal for the output alarm
signal when motion is detected.
• Area: Select the desired motion detection area
on the preview window screen using the
mouse. Click the one point and drag & drop
the end point to select the motion area.
Notes:
• If you want to display the grid, mark up the [Show
Grid] option.
• If you want to select the entire area, click the [Set
All] button or click the [Clear All] button to cancel
the selected area.
CLIENT
PROGRAM
