A SERVICE OF

logo

Open as PDF
next previous
ENGLISH
STEAM FUNCTIONS (cont.)
1
3
To Fill the Steam Feeder
Open the lid.
2
Lift out the steam feeder.
Fill the steam feeder to MAX with water.
4
Place the steam feeder in the square barrel,
then cover the lid.
Lid
MAX
Water
ONLY
Steam
Feeder
wWARNING:
•Donotfillthesteamfeederwithliquidssuchasgasoline,dry-cleaningsolvents,orotherflammableorexplosive
substances. They give off vapors that could explode.
•Donotfillthesteamfeederwithhotwater(over86°F/30°C).
•Donotdrinkwaterfromthesteamfeeder.
IMPORTANTNOTESABOUTSTEAMCYCLES
Before using a Steam Cycle, the steam feeder must be filled with water up to the MAX line. If not, the
ADD WATER light will blink. Make sure that the steam feeder is filled with water and the cartridge is
completely connected. Turn the dryer off then restart the Steam Cycle.
•Onlyusewater.Donotfillthesteamfeederwithforeignsubstances,rinseagents,ordetergents.
•Beforemovingthedryer,makesurethesteamfeeder is empty.
•Donotusedistilledwater;thewaterlevelsensorinthesteamgeneratorwillnotwork.
•Becarefulwhilefillingthesteamfeedertoavoidoverflowandspilling.
•Wipeupanyspilledwateraroundthesteamfeederandthedrawerbeforestartingthedryer.
33
2
1