27
ENGLISH
Care and Maintenance
• Keep the remote dry. If it gets wet, wipe it dry immediately.
• Use and store the remote only in normal temperature
environments.
• Handle the remote gently and carefully. Don’t drop it.
• Keep the remote away from dust and dirt.
• Wipe the remote with a damp cloth occasionally to keep it
looking new.
• Modifying or tampering with the remote’s internal devices can
cause malfunction and invalidate its warranty.
Problem: The remote will not change channels on
device.
• Make sure the remote is in the correct mode by pressing
the corresponding device key (TV, SAT•CBL•STREAM, DVD,
DVR•AUX1, VCR•AUX2, AUDIO). This tells the remote which
device to operate.
• Press the OK / ENTER key after you enter a channel number.
• Remove any obstacles between the remote and the device. Make
sure to aim the remote at the IR sensor on the device.
Problem: The device’s menu does not appear on the
TV screen.
• Make sure you have connected the device to your TV properly
and selected the correct input. (See your devices’ Owner’s
Manuals for proper connection procedures.)
• Make sure the remote is in the correct mode by pressing
the corresponding device key
(TV, SAT•CBL•STREAM, DVD,
DVR•AUX1, VCR•AUX2, AUDIO). This tells the remote which
device to operate.
• Menu access isn’t supported for all brands. You may need to use
your original remote control to access menu functions for some
devices.
Problem: The Learning process cannot be
completed successfully.
• Replace batteries in both the learning remote and the original
remote.
• Make sure the distance between the remotes is approximately
1–2 inches.
• Do not conduct the Learning process near an incandescent lamp.
• The learning remote’s memory capacity may be full (50 Learned
commands).
• The original remote may not be compatible with the Learning
procedure.
For more information, please visit
www.RCAAudioVideo.com
Consumer Help Line: 1-800-420-7968
