■ Upon loading laundry, it
displays the correct amount of
detergent to be added
according to the amount of
laundry (based on
concentrated detergent).
Detergent deposit
display
■ Use it to adjust the strength of
water current.
■ By pressing the button, it
cycles
[ ].
■ Strength of the water current can
be adjusted at any program.
At the beginning, it starts with
MED
( ).
Wash power
■ Indicates the current washing
status.
■ Next step is lit, current step blinks
and finished step is turned off.
Wash Process display
■ Use this function for delayed
washing.
■ Use it to set the delay time.
■ By pressing the button, it cycles
[3→4→5→...→11→12→14→
16→...→46→48→3] hours.
(Up to 48 hours can be
delayed).
■ To cancel delay time, turn the
power switch off.
How to use delayed
washing
■ By pressing the button, it cycles
[LARGE→LARGE•EX-LARGE→EX-LARGE
→SMALL→SMALL•MEDIUM→MEDIUM
→MEDIUM•LARGE→LARGE]
■ At FUZZY and JEAN program, water level is selected automatically
based on the amount of laundry.
■ Water level is set to MEDIUM for SPEEDY program, LARGE for
WOOL and DELICATE program, EX-LARGE for BLANKET program.
■ Water level can be adjusted even when the washer
is in operation.
How to adjust the water level
■ Use it to select hot or cold
water (When hot water only is
selected, hot water is supplied
for washing and cold water are
supplied for rinsing).
■ In WOOL, HOME DRY
program, cold water is selected
automatically (Hot water may
damage the fabric).
How to select temp.
NOTE
