C-2
ACCESSORIES
C-2
RECOMMENDED EQUIPMENT
STICK
K704(400 Amp) or K875(150 Amp)Accessory Kit
which includes:
• Electrode Holder & Cable
• Work Clamp & Cable
• Headshield
WIRE
FEED
K449 LN-25 - Includes internal contactor for across
the arc operation (no control cable). Provides “cold”
electrode until gun trigger is pressed. Includes gas
solenoid.
K1870-1 LN-15 Across the Arc Wire Feeder.
Portable, lightweight, compact CC/CV unit for flux-
cored and MIG welding. Includes Gas Solenoid,
adjustable flow meter and internal contactor. For 10-
15 lb. (4.5-6.8kg) spools.
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Innershield Gun is
required for gasless welding.
K126-2 Magnum 350 Innershield Gun
K1802-1 Magnum 300 MIG Gun (for LN-25)
K470-2 Magnum 300 MIG Gun (for LN-15)(Includes
Connector Kit)
K466-10 Connector Kit (for LN-15, K470-2)
K1500-1 Gun Receiver Bushing (for LN-15 & K126-2)
TIG
K1783-9 Pro -Torch® PTA-26V TIG Torch
Air Cooled 200 amp torch (2 piece) equipped with
valve for gas flow control. 25 ft. (7.6m) length.
KP509 Magnum Parts Kit for PTA-26V TIG Torch
Magnum Parts Kit provides all the torch accessories
you need to start welding. Parts kit provides collets,
collet bodies, a black cap, alumina nozzles and tung-
stens in a variety of sizes, all packaged in an easy to
carry reclosable sack.
K930-2 TIG Module
Requires K938-1 Contactor Kit,
K936-4 Control Cable, and K814
Arc Start Switch
Optional TIG Equipment:
K939-1 Docking Kit
K937-45 Control Cable Extensions
K844-1 Water Valve Kit
PLASMA CUTTING
K1580-1 Pro-Cut 55
Cuts mild steel using the 3-phase AC generator power
from the engine driven welder. Accepts 3-phase or 1-
phase input power. Requires the K1816-1 Full KVA
adapter kit, if connected for 1-phase input power.
EAGLE 10,000
