EtherFast
®
Layer 3 Management 24-Port 10/100 + 2-Port Gigabit Ethernet Switch
17
Instant EtherFast
®
Series
16
The Management Setup Menu screen allows you to configure the IP address
for the Switch, serial port settings for console management, SNMP parameters,
and user privileges.
• Network Configuration - Includes IP setup, ping facility, and HTTP setup
for the on-board Web agent.
• Serial Port Configuration - Sets communication parameters for the serial
port, including baud rate, console time-out, and screen data refresh interval.
• SNMP Configuration - Activates authentication failure traps and configures
communities and trap managers.
• User Configuration - Sets the user names and passwords for system access.
• TFTP Download - Downloads new version of firmware to update your sys-
tem.
• Configuration File - Allows downloading of a configuration file.
• Management Access Control - Allows management of user access to the
Switch.
Select OK to return to the previous panel.
Management Setup Menu
Switch Information
The Switch Information screen displays hardware and firmware version num-
bers for the main board, as well as the power status.
• Hardware Version - Hardware version of the main board.
• Firmware Version - System firmware version in ROM.
• Serial Number - Serial number of the main board (MAC address of the
Switch).
• Port Number - Number of ports available on this Switch.
• Power Status - Shows if power is active or inactive.
• Redundant Power Status - Status of redundant power supply.
• Fan Power Status - Shows if power to fan is active or inactive.
• G1 Information - Speed of the first Gigabit port.
• G2 Information - Speed of the second Gigabit port.
Select OK to return to the previous panel.
