33
Chapter 5: Using the Web-based Utility for Configuration
Switch Conf. (Configuration) Tab - LACP
WebView Switches
Switch Conf. (Configuration) Tab - LACP
The LACP screen allows you to enable the use of the Link Aggregation Control Protocol (LACP) on relevant links
for LAGs. Listed on this screen are the LACP LAGs.
LACP System Priority (1 - 65535). Select the LACP priority value for the system. Then, click the Submit button.
LACP information is displayed below, per port.
Port. This is the port number using LACP.
Port Priority. This is the LACP priority value for the port.
LACP Timeout. This is the administrative LACP timeout period, Short or Long.
Click the pencil-shaped Edit icon to modify settings for a port. A new screen will appear, displaying the available
LACP settings.
Port. Select the port you want.
LACP Port Priority. Select the LACP priority value for the port.
LACP Timeout. Select the LACP timeout period for this port, Short or Long.
Click the Submit button to save your changes.
Figure 5-19: Switch Configuration - LACP
Figure 5-20: LACP - Change Settings
