Follow the steps below to program the VCR to record TV pro-
grams while you’re away from home. Before you begin:
● Set up the TV channels at the DVD/VCR. Details are on page 26.
● Set the clock. Details are on pages 28-29.
● Put a tape in the cassette compartment. Make sure the tape’s
record tab is intact and the tape is long enough to record the
program(s).
● Press VCR so the VCR light appears on the front of the
DVD/VCR.
1
Press DISC/MENU so MENU appears.
2
Press o or p to select TIMER PROGRAMMING.
Then, press B. Program numbers that do not have a
timer recording stored will flash.
TIMER PROGRAMMING
PROG. 12345678
DATE
START TIME
END TIME
CHANNEL
REC SPEED
3
Press o or p to select an empty program.Then,
press
B.
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
4
Press o or p to select ONCE, DAILY, or WEEKLY.
Then, press B.
● ONCE - The VCR will record a TV program on any day
you choose, up to 12 months away.
● DAILY - The VCR will record a TV program at the same
time on the same channel every day, Monday through
Friday.
● WEEKLY - The VCR will record a TV program at the
same time on the same channel every week, for example,
every Monday.
• You cannot access the TIMER PRO-
GRAMMING menu at step 2 if the
clock is not set.The CLOCK SET
menu will appear. Follow the steps
on pages 28-29 to set the clock.
• Only programs that will air Monday-
Friday can be recorded on a DAILY
basis. If you select DAILY at step 4,
then enter a Saturday or Sunday
DATE at step 5, the correct program
will not record.The VCR will alter the
recording date and record a differ-
ent program than the one you
intended.
Helpful Hints
2-4
1
