11
CONNECTING YOUR RECEIVER
Place your Plaza DS•100 receiver on a rm,
level surface close to the television, an electric
socket, and the cable from the dish. (See
Appendix A - Safety.)
Connect the cable from your dish to the LNB IN
socket at the back of the receiver (if the dish
cable is tted with a wall socket inside your
home, you will need a connecting cable, which
you can get from your installer).
HINT: The ‘F-connector’ used for
connecting the satellite dish cable to the
receiver has a central wire that is inserted
into the hole in the LNB IN socket while
the collar is screwed onto the socket.
When screwing the collar on make sure the
central wire goes into the socket hole and
is not bent to one side.
