A SERVICE OF

logo

Open as PDF
next previous
EN-20
8. ProjectorView
ProjectorView is a web-browser based remote control and monitoring tool for network projectors. If you use the
projectors listed in page 32, see ProjectorView in “LAN Control Utility” User Manual included with the projector.
<Note>
• WhenCRESTRONisselectedwiththenetworkmenu,itbecomestheWebcontrolforCRESTRON.
8.1. Main functions
• Itdisplaysthestatusofnetworkprojectors(suchasthenameoftheprojector,lamptemperature,lamphours,
errors and alerts).
• Itcontrolsnetworkprojectors(suchaspoweringonandoffnetworkprojectorsandswitchinginputorlamp
modes).
• ItsendsanE-mailnoticationwhenanerrororwarningoccurs.
8.2. Starting ProjectorView
(1) Select the projector that you want to operate from the list of projectors on the main screen.
• StartProjectorViewforoneprojectoratatime.YoucannotconcurrentlyuseProjectorViewformultiple
projectors.
(2) Click [ProjectorView] in the tool bar on the main screen.
• TheWebbrowserlaunchesautomatically.Thepasswordentrywindowisthendisplayed.
<Note>
• YoucanstartProjectorViewbymanuallytypingtheprojectorIPaddressinyourwebbrowser’saddress
bar.
• Ifyouareusingaproxyserver,donotenableproxysettingswhenaccessingtheprojectorIPaddress.
• UptothreeProjectorViewunitscanbeusedtocontrolasingleprojector.
(3) Enter the password and click [OK]. (The default password is “admin”.)
• “ProjectorView”mainwindowisdisplayed.
<Note>
• Theconnectionwillturnoffinveminutesafterthepasswordentrywindowisdisplayed.Youcannotenter
the password then. If this happens, restart the ProjectorView.