40 Faxing: Advanced Operations
Sending a Fax at a Later Date and Time
Your can program your OKIFAX up to three days in ad-
vance to send documents at a specified date and time.
You can send one delayed fax at a time either from the
document feeder or from memory. Refer to the table be-
low to decide which method you want to use.
Delayed TX Features From From
and Limitations Feeder Memory
Number of locations One Multiple
Number of delayed faxes One Up to 5
loaded into your OKIFAX
at one time
OKIFAX can be used for No Yes
other transmissions while a
delayed fax is waiting to be sent?
Note: The OKIFAX 5050 sends from the feeder by default.
To change the default setting, see “Mem./Feeder SW.”,
page 53.
Sending a Delayed Fax from the Document Feeder
1 Load your documents.
2 Press the Select Function key.
3 Press the 1/Delayed TX One Touch key. The display
shows DELAYED TX and today’s date.
4 If the transmission is to occur on the same day, skip to
step 6. Otherwise, press the No
ᮣ
key. The display shows
PRG. START DATE 0-9.
5 Using the numeric keypad, enter the date you wish the
transmission to begin—up to three days in advance.
6 Press the Yes ᮤ key. The display shows PRG. START
TIME 0-9.
7 Using the numeric keypad, enter the time you wish the
transmission to begin, in 24-hour format—8:00
AM is
08:00; 8:00
PM is 20:00.
8 Press the Yes ᮤ key. The display shows FEEDER TX.
9 Press the Yes ᮤ key.
Faxing: Advanced Operations
Of5050hw.pm6 4/15/98, 9:32 AM40
