A SERVICE OF

logo

Open as PDF
next previous
FIGURE 5
STEP 5:
9
• Route LEG CABLE (2) around the 3-1/2” PULLEY on the LEG PRESS as shown in FIGURE 5. (NOTE: Pulley may need to be
temporarily removed.)
• SECURELY attach the 100 LEG PRESS to the FRONT LEG (1) using two 3/8” X 3” BOLTS (9), four 3/8” WASHERS (6), and
two 3/8” LOCK NUTS (7). See FIGURE 5.
• Attach the end of the LEG CABLE (2) to the QUICK DISCONNECT LINK (5). See FIGURE 5.
• SECURELY tighten the QUICK DISCONNECT (5) to the tab on the FRONT LEG (1) as shown in FIGURE 5.
3/8 X 3” 9
2
5
1
6
100 LEG PRESS
7