A SERVICE OF

logo

Open as PDF
next previous
31
STEP 35
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
• To assemble the PRESS CABLE (100) follow the cable routing as shown and use the following steps:
• Route the PRESS CABLE (100) around pulleys and L-brackets as shown in FIGURE 35.
FIGURE 34
FIGURE 35
STEP 34
• Assemble two 4-1/2” PULLEYS (43) to two 2 X 7-1/4” PLATES
(33) using two 3/8 X 2-1/4” BOLTS (86) four 3/8” WASHERS
(91), and two 3/8” LOCK NUTS (92) as shown in FIGURE 34.
91
86 3/8 X 2-1/4”
43
33
92
100
100