A SERVICE OF

logo

* All connections use one 3/8 X 1" BOLT (18) and one 3/8" FLAT WASHER (23)
FIGURE 6
STEP 6:
¯
Securely fasten the BACK PAD (9) to the LEFT (5) and RIGHT (6) BACK PAD ANGLES using four 3/8
BOLTS (18) and four 3/8" FLAT WASHERS (23) as shown in FIGURE
¯
Securely fasten the SEAT PAD (10) to the HINGE TABS (13) using two 3/8 1"BOLTS (18) and two 3/8"
FLAT WASHERS (23) as shown in FIGURE
¯
Securely tighten the four connections on the 1/4 X 2 X 16-1/2" PLATES (4), then back nuts off 1/4 of a turn
until the BACK PAD (9) adjusts easily.
THIS CONCLUDES ~ ASSEMBLY OF THE 805106 FLAT & INCLINE BENCH
,, I,,,I,,,l,,,I,,,
¯ "