C. Traps and MIBs
4200-A2-GB20-00 August 2002
C-37
loginUserPriv Contains the access privileges of the
user.
Read only. Valid values are:
administrator(1)
operator(2)
loginStatus Indicates whether the user is still
accessing the device.
Read only. Valid values are:
active(1)
inactive(2)
loginFailureAccessApp Describes the access application used
by the end user to access the device.
Read only. Valid values are:
console(1)
telnet(2)
ftp(3)
loginFailureCount Contains the number of unsuccessful
logins for console, FTP or Telnet.
Read only.
trapCommunityName The name of the SNMP community. Data string (1−32).
trapDestAndPort The IP address and port of the
destination of the trap.
Address.
trapsEnable Turns traps on (enable) or off (disable)
for a particular destination.
Valid values are:
enable(1)
disable(2)
trapRowStatus Used to add or delete a row from the
table.
Read only.
entCommunityName The SNMP community name. Data string.
entCommunityType The type of community. Valid values are:
readOnly(1): Community can only do
gets. Default value.
readWrite(2): Community can do gets
and sets.
entCommunityRowStatus Used to add or delete a row from the
table.
Read only.
sysDevUserAccountUserId The login ID of the user account. Display string.
sysDevUserAccountPrivilege The access privililege of the user
account.
Valid values are:
operator(1)
administrator(2)
sysDevUserAccountUserPas
sword
The password of the user account. Display string.
sysDevUserAccountUser
Partition
The access partition of the user
account.
Default is ALL.
sysDevUserAccountRow
Status
Used to add or delete a row from the
table.
Read only.
Table C-15. Paradyne DSLAM System MIB Objects (2 of 3)
Object Description Setting/Contents
