25
E
N
Pin As
Pin As
signment
signment
The 15-pin D-sub connector (male) of the signal cable:
Pin No. Assignment
BNC Connector
BNC Connector
25
OSD
OSD
W
W
arning Signal
arning Signal
Additional Information
• THIS IS THE BEST PICTURE SHAPE •
This screen appears when the picture size is extended to the edge of
viewable area with the same video aspect ratio. The picture size can be
futher enlarged to full screen size with a distorted aspect ratio if you
continuously turn the size control.This applies when the user attempts
to stretch 4:3 aspect resolutions (640x480, 800x600,1024x768 or
others) to totally fill the screen.
• WAIT FOR AUTOMATIC ADJUSTMENT •
This screen appears when you touch the AUTO button. It will
disappear when the monitor is properly adjusted.
• SECOND VIDEO IS NOT AVAILABLE •
This screen appears when there is no second video source input.
Pressing the VIDEO 1-2 BUTTONS on the front of LCD monitor can switch
the video input signal between the D-sub and BNC connectors. This
message appears if one of the signals is not available.
The 5 BNC connectors are positioned as follows:
R: Red video input
G: Green video input
B: Blue video input
H: Horizontal sync
V: Vertical sync
Pin Assignment
BNC
R G B H V
1 Red video input
2 Green video input
3 Blue video input
4 Identical output
- connected to pin 10
5 Self test
6 Red video ground
7 Green video ground
8 Blue video ground
9 No pin
10 Logic ground
11 Identical output
- connected to pin 10
12 Serial data line (SDA)
13 H. Sync / H+V
14 V. Sync (VCLK for DDC)
15 Data clock line (SCL)
