Image vibrates on the screen
Check that the signal cable is properly connected to the
graphics board or PC.
Vertical flicker appears
Press the Auto button.
Eliminate the vertical bars using the Phase/Clock of More
Settings in OSD Main Controls.
Horizontal flicker appears
Press the Auto button.
Eliminate the vertical bars using the Phase/Clock of More
Settings in OSD Main Controls.
The screen is too bright or too dark
Adjust the contrast and brightness on On-Screen Display.
(The backlight of the LCD monitor has a fixed life span. When
the screen becomes dark or begins to flicker,
please contact
your sales representative).
An after-image appears
If an image remains on the screen for an extended period of
time, it may be imprinted in the screen and leave an after-
image. This usually disappears after a few hours
Always activate a moving screen saver program, a periodic
screen refresh application or turn on the Pixel Orbiting
function when displaying unchanging or static content on your
LCD monitor for any extended period.
To activate the Pixel Orbiting function:
Press the OK button to bring up the OSD (On-screen
Display) menu
Select Setup, then choose the Pixel orbiting function
setting
Use the cursor Up/Down button select Yes to activate
Pixel Orbiting; select No to turn off Pixel Orbiting
