Getting to know the remote control4
English
Getting to know the remote control
1. Power/standby
Press this button to power the display on or put it to
standby mode. See "Power on and standby" on page 7.
2. 電視 (TV)
Press this button to switch directly to the (traditional)
analog channel mode to view analog channels. See
"Viewing traditional (analog) or digital programs" on
page 7.
3. 數位電視 (DTV)
Press this button to directly switch to the digital
channel mode and view digital channels (A separate
digital video tuner is required to use this function).
See "Viewing traditional (analog) or digital programs"
on page 7.
4. Channel selection
Press these buttons to select the channel you wish to
view. See "Selecting a channel directly" on page 8.
5. Triple-digit channel entry
Press this button prior to entering a triple-digit channel
number. See "Selecting a channel directly" on page 8.
6. ///and OK buttons
When the OSD menu displays on-screen:
• Press or to select settings.
• Press or to adjust settings.
• Press OK to execute selections, or to enter a
submenu you have selected. In digital channel mode,
press OK to display or hide the channel list (A
separate digital video tuner is required to use this
function).
See "Navigating the OSD menu" on page 17.
7. 目錄 (Menu)
Press this button to display the OSD menu for
commands and settings. Press it again to close. See
"Navigating the OSD menu" on page 17.
8. 頻道 (Channel)
• Press these buttons to sequentially change channels.
See "Changing channels sequentially" on page 8.
• In EPG, press these buttons to go to the previous or
next page (A separate digital video tuner is required
to use this function).
9. 靜音 (Mute)
Press this button to mute the sound output. Press it
again to restore the sound output. See "Mute setting"
on page 7.
32PF1700T_96_Tuner-RC-EN.book Page 4 Thursday, April 26, 2007 5:35 PM
