A SERVICE OF

logo

4.12 Resetting the unit
When you reset the unit, the settings listed in Table "4.1 Default settings",
under the section entitled "After reset" are established.
Initial state:
idle
Steps:
No. Description Input Display
Please note that the display only changes about 10 seconds after you
have pressed
o . The top two lines are then displayed in black for about
10 seconds, while all pictograms are displayed in the 3rd line.
4.13 Programming picking up a call/conversation
(SmartLine D721 only)
You can program whether a connection can only be picked up during the
ringing phase or also after a call has been accepted ("Line pick-up = on").
A practical example of "pick up during a call" is when an answering
machine is connected to the analog port and you want to accept the call
after the answering machine has already answered it.
06.05.9988810:40
((((((((((((((((
ŋǤ‰ ÏÌÓÛı
o
Confirm reset3
RESET
OK = Confirm
ŠǤ‰ÏÌÓÛı
Z
Enter the PIN2
RESET
PIN ? ----
ŠǤ‰ÏÌÓÛı
s 0 0 9
Initiate
programming
1
53