![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/9/a5/9a5c56bd-5211-406a-ad7c-a6beea30588f/9a5c56bd-5211-406a-ad7c-a6beea30588f-bg32.png)
50
The contents of the USB fl ash drive cannot
be read.
The USB fl ash drive format is not •
compatible with this Home Theater
System.
Drive is formatted with different fi le •
system which is not supported by this unit
(e.g. NTFS).
Maximum size of memory supported is •
160 GB.
No sound from the rear speakers and the
indicator on the wireless receiver blinks
continuously for more than one minute.
(For HTS3578W only)
Ensure that all required connections are •
connected and carry out the following
steps:
1) Press
.
2) Press INFO . A screen is displayed.
3) Press 1 , then press the SURR button
within 5 seconds. ‘PAIRING SUCCESS’ is
displayed.
4) If ‘PAIRING FAIL’ is displayed, repeat
steps 1 to 3.
No sound from TV programme.
Connect an audio cable from the AUDIO •
input on this Home Theater System to the
AUDIO output on your TV. Then press
AUDIO SOURCE repeatedly to select the
corresponding audio input source.
No surround sound effect from the speakers.
Press • SURR to select a correct surround
sound setting.
If the Home Theater System does not •
support DTS playback, press AUDIO
SYNC to select other audio track.
Ensure that the source you are playing •
is recorded or broadcast in surround
sound (Dolby Digital, etc).Sound cannot
transmit through HDMI connection if the
connected device is non-HDCP compliant
or only DVI-compatible. Make an analogue
or digital audio connection.
Play
DivX video fi les cannot be played.
Ensure that the DivX fi le is encoded •
according to the ‘Home Theatre Profi le’
with the DivX encoder.
Ensure that the DivX video fi le is complete. •
The aspect ratio of the screen is not aligned
with the TV display setting.
The aspect ratio is fi xed on the disc.•
DivX subtitle does not display correctly.
Ensure that the subtitle fi le name is the •
same as the movie fi le name.
Select the correct character set: •
1) Press
SETUP .
2) Select [Preferences] , then press
.
3) Select [DivX Subtitle] , then press OK .
4) Select the character set that supports
the subtitle.
EN
1_hts3571-78W_98_en.indd 501_hts3571-78W_98_en.indd 50 2/4/2009 4:04:54 PM2/4/2009 4:04:54 PM