36
[Auto Standby]
Turns off or turns on standby switching mode.
It is an energy saving feature.
• [On] - Switches to standby after 30
minutes of inactivity (for example, in
pause or stop mode).
• [Off] - Disables auto standby mode.
[PBC]
Turns off or on the content menu of VCDs/
SVCDs with PBC (playback control) feature.
• [On] - Displays index menu when you
load a disc for play.
• [Off] - Skips the menu and start play
from the À rst title.
[Sleep Timer]
Switches to standby automatically after a
delay.
• [Off] – Disables the sleep timer.
• [15 Minutes] , [30 Minutes] , [45 Minutes] ,
[60 Minutes] – Selects a delay.
EasyLink Setup
1 Press .
2 Select [Settings] , then press OK .
3 Select [EasyLink Setup] , then press .
4 Select an option, then press OK .
5 Select a setting, then press OK .
To return to the previous menu, •
press
BACK .
Video Setup
Advanced Setup
Audio Setup
Preference Setup
EasyLink Setup
One Touch Play
EasyLink
One Touch Standby
On
On
System Audio Control
Off
Audio Input Mapping
On
[Parental Control]
Restricts access to discs that are unsuitable
for children. These types of discs must be
recorded with ratings.
To access, enter your last set password or
‘ 0000 ’ using the keyboard on the TV.
Note
Rated discs above the level you set in • [Parental
Control] require a password to be played.
The ratings are country-dependent. To allow
•
all discs to play, select ‘ 8 ’ for DVD-video and
BD-Video.
Some discs have ratings printed on them but
•
are not recorded with ratings. This function
has no effect on such discs.
[Screen Saver]
Turns off or on the screen saver mode. Helps
to protect the TV screen from being damaged
due to over exposure to static image for too
long.
• [On] - Sets the screen saver to appear
after 10 mins of inactivity (for example, in
pause or stop mode)
• [Off] - Disables screen saver mode.
[Change PIN]
Sets or changes the password.
1) Press the Numeric buttons to enter the
password or your last set password. If you
forget the password, enter ‘ 0000 ’, then press
OK .
2) Enter the new password.
3) Enter the same password again.
4) Move to [ConÀ rm] in the menu and press
OK .
[Display Panel]
Selects the brightness level of the front panel
display.
• [100%] - Brightest
• [70%] - Medium
• [40%] - Dimmest
EN
