the light bulb.
After installing a new lamp in the TV, you
need to enter the “Lamp rating” list in the on-
screen menu and select the alphabetical code
that is provided with the lamp. The recom-
mended Philips replacement Lamp is rated
for 6000 hours, an F rating
The next step is to use the “Lamp replaced
control” to tell the TV that you have installed
a new lamp. This control resets the Lifetime
Counter to 0 for the new lamp and begins
keeping track of the lifetime of the new lamp.
1
Press the Menu button on the remote
control to display the on-screen menu.
2
Press the Cursor Down button to select
“Settings.”
3
Press the Cursor Right button to select
the “General” menu.
4
Press the Cursor Down button repeat-
edly until “Lamp rating” is selected.
5
Press the Cursor Right button to enter
the rating list.
6
If necessary, press the Cursor Down
button as many times as necessary to
select the letter for your replacement
lamp.
7
Press the Cursor Left button to return
to the “General” menu.
8
Press the Cursor Down button to select
“Lamp replaced.”
9
Press the OK button to confirm that
you have changed the lamp.
10
Press the Menu button to remove the
on-screen menu from the TV screen.
• One hundred hours before the lamp
reaches the end of its life, a warning
message will appear on screen to alert
you. Changing the lamp at this point is
recommended for optimal performance.
• A blinking orange light on the front of
the set means that the lamp is not work-
ing anymore and needs to be replaced.
HELPFUL HINTS
