Normal
Mode
Minimum
Mode
The television’s on-screen display (OSD) can
be set to show only the current channel num-
ber or the channel number with additional TV
operating modes and status-screen informa-
tion.
1
Press the Menu button on the remote
control to display the on-screen menu.
2
Press the Cursor Down button to select
“Settings.”
3
Press the Cursor Right button to select
the “General” menu.
4
Press the Cursor Down button repeat-
edly to select the “OSD” control.
5
Press the Cursor Right button to toggle
between “Minimum” and “Normal.”
Normal mode—the on-screen display
stays on screen. Channel/Input source,
call letters and program name (if pro-
vided by the signal source), picture for-
mat, and sound mode are shown.
Minimum mode (default mode)—
channel/Input source, call letters, and
program name (if provided by the sig-
nal source) are shown. The on-screen
display disappears after a few seconds.
In Minimum mode, the volume scroll
bar will not be displayed when you
press the volume control.
6
Press the Menu button to remove the
on-screen menu from the TV screen.
