T
he AUTO PROGRAM feature will scan for channels with
active broadcast signals and store those channels in the TV’s
memory. It will tune up to 69 channels for antenna, and up to 125
channels for cable. After you run AUTO PROGRAM, you can use
the CH(annel) +/– buttons to quickly and easily select stations.
You can also press the PROG. LIST (Program List) button on
your remote to see a list of the channels.
1
Press the MENU/SELECT button. The onscreen menu
appears. Then press the CURSOR RING DOWN repeated-
ly until INSTALL is highlighted.
2
Press the CURSOR RING RIGHT to enter the INSTALL
submenu. Then press the CURSOR RING DOWN repeatedly
until AUTO PROGRAM is highlighted.
3
Press the CURSOR RING RIGHT to begin the automatic
search for channels. The progress of autoprogramming is dis-
played.
4
When the programming is done, press the STATUS EXIT
button to exit the menu.
4
T
UNER MODE
S
et the TUNER MODE control according to the type of signal you have
connected to the TV—ANTENNA or CABLE. If you select AUTO, the
TV will automatically detect the type of signal you have connected.
1
Press the MENU/SELECT button. The onscreen menu
appears. Press the CURSOR RING DOWN repeatedly until
INSTALL is highlighted.
2
Press the CURSOR RING RIGHT to enter the INSTALL
submenu. Then press the CURSOR RING DOWN once to
highlight TUNER MODE.
3
Press the CURSOR RING RIGHT to highlight the
TUNER MODE options list.
4
Press the CURSOR RING DOWN or UP repeatedly until
you select the option that matches your signal connection,
CABLE or ANTENNA. If you want the TV to determine
the type of signal, select AUTO. (You have selected an
option when the dot and triangle are next to the option.)
5
Press the STATUS/EXIT button to exit the menu.
6
Proceed to the section on “Auto Program.”
T
he menu LANGUAGE control enables you to set the TV’s
onscreen menu and onscreen displays to be shown in English,
French, or Spanish. Follow the steps in this section to set the con-
trol.
1
Press the MENU/SELECT button. The onscreen menu
appears.
2
Press the CURSOR RING DOWN repeatedly until
INSTALL is highlighted. Then press the CURSOR RING
RIGHT to enter the INSTALL submenu.
3
Press the CURSOR RING RIGHT again to highlight the
menu LANGUAGE options list.
4
Press the CURSOR RING DOWN or UP to select your
menu language.
Instantaneously, the onscreen displays appear in the lan-
guage that you choose.
5
Press the STATUS/EXIT button to exit the menus.
AUTO PROGRAM
.
.
language you chose.
