5Use of the menus
Picture 2 menu
Format
Select
Format to summon a list of available display formats.
Press the cursor up/down to select another display format: 4:3
or Wide screen.
Zoom
Select
Zoom On to activate the zoom function.You may also activate the
zoom function with the
ZOOM ON/OFF key on the remote control.
If no zoom is active, press the cursor left/right, up/down to select which part
of the screen will be zoomed.
Zoom factor
Select
Zoom factor and press the cursor left/right to adjust the zoom factor
and to change the magnification of the picture.
If zoom is not active changing the magnification factor will have no effect on
the displayed picture.
Shift (optional, only available in VGA mode on VGA 1 or VGA 2)
This control allows you, when necessary, to move the picture in a horizontal
or vertical way.
& Use the cursor left/right, up/down to adjust.
é Press the OK key when done.
Clock frequency (optional, only available in VGA mode on VGA 1 or VGA 2)
This control allows you, when necessary, to adjust the values of the clock
frequency so that especially text can be displayed with an optimal overall
sharpness.
Use the cursor left/right to adjust.
Phase (optional, only available in VGA mode on VGA 1 or VGA 2)
This control allows you, when necessary, to adjust the pixel phase of the
picture to avoid picture interference.
Use the cursor left/right to adjust.
Auto align (optional, only available in VGA mode on VGA 1 or VGA 2)
This control allows you to automatically adjust the shift, the clock frequency
and the phase in VGA mode.
Press OK to execute.
4:3
Wide screen
Format
q
4:3
Wide screen
Zoom
Z
Zoom factor
Â
Shift
‹
Clock frequency
S
Phase
fi
Auto align
X
Pict. a
2
2271.1 en 23-10-2003 15:52 Pagina 5
