° Review the information to make sure it is correct, and then
press MENU-PROG to save.
Program 1 (One Time)
Channel 03 Cable
Start Time 08:00 PN
End Time 09:30 PM
Start Date 10124197 FRI
Tape Speed SLP
I=SP 2=SLP
Press CLEAR to correct
Press MENU to save
Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Press NENU to continue
TIMER RECORDING WITH VCR PLUS+
You can use VCR Plus+ to simplify timer programming if you
have cable TV and don't receive all channels through a cable
box, have a cable box the VCR can control, or if you get your TV
signal off-air.
Setting Up the Channel List
if you did not set up the VCR Plus+ channel list, you can do
it now.
1. Display the CHANNELS menu from the VCR MAIN MENU.
2. Display the VCR Plus+ Channel List menu.
3. Go to Setting Up Your VCR if you need more information
on setting up your VCR Plus+ channel list.
Using VCR Plus+
1. PressMENUaPROG to bring up the VCR MAIN MENU.
VCR RAIN MENU
1VCR PLUS+
2 Timer Recordings
3 Time
4 Channels
5 Preferences
6 Audio
? Language
0 Exit
VCR MAIN NENU
1VCR Plus+
2 Timer Recordings
] Time
4 ChanneLs
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
VCR Plus+ Channel List
VCR+ Channel My Channel
5 46
4 --
3 -> -> -> 23
2 --
1 "--
Use CH+/- to select
Press 0-9 to change
Press MENU to save
.
Press 1 to display the VCR PLUS+ menu.
VCR PLUS+
Enter PlusCode number
(from TV listing)
Press REflU to cancel
VCRPlus+and PlusCodeare registeredtrademarksof GemstarDevelopment Corporation.
30
