ERRATA AND ADDITIONAL INFORMATION
[P88] Additional Information: Specified Cassette Selection
— Specified cassette selection only allows printing from the Optional Lower
Cassette. Printing from the Optional Removable Cassette (as stated in the title) is
not available.
— You do not need to select the specified cassette using Function 37.
[P88] Additional Information: Printing received fax messages using specified
cassette selection.
❐ Use function 62 to switch specified cassette selection on/off.
❐ Use function 63 to switch specified cassette selection on/off and decide
how to treat the specified senders.
❐ Use function 81 to program the specified senders’ indentification. If you
wish to treat each sender differently, use this function.
[P169] Errata:
Only the optional paper feed cassette is required for specified cassette selection
— not the optional feature expander as stated.
[P172] Additional Information:
Switch 07
Digit 5 Digit 4 Setting
X0Off
01
Messages from senders whose RTI/CSI are programmed are printed
from a upper cassette.
11
Messages from senders whose RTI/CSI are not programmed are printed
from a upper cassette.
[Pages 132,181] - Additional information
When you set paper in the cassette, please note the following:
1. Set the paper into the cassette.
2. If there is space
between the two side fences
and the paper, push the
fences flush to the paper.
End fence
Side fence
[Main Cassette]
[Optional Paper Feed Cassette]
8
1
2
11
11
