Basics
22
1
Starting the Machine
A
AA
A
Press the operation switch to make the On indicator go on.
The display panel will come on.
Note
❒ If the power is not turned on when the operation switch is pressed, check
if the main power switch is on. If off, turn it on.
❒ During the warm-up period (less than 330 seconds), you can use the Auto
Start function. See ⇒ p.88 “Auto Start”.
❒ You can set up a copy job and press the {
{{
{Start}
}}
} key while the “Select modes
and press the start key. Scanning originals can be started.” message is dis-
played.
❒ When “Input user code, then press # .” is displayed, enter your user code.
See ⇒ p.87 “User Codes”.
Shutting Down the Machine
A
AA
A
Press the operation switch to make the On indicator go off.
Turning Off the Main Power
A
AA
A
Turn off the main power switch.
The main power indicator of the control panel goes off.
TSPS010N
Sample Copy
Interrupt
op
Start
On
Main Power
