![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/2/83/28300c2f-210e-422c-8c68-fb067ecdbb82/28300c2f-210e-422c-8c68-fb067ecdbb82-bg11.png)
Panel Descriptions
(continued)
17
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
[MIC LEVEL] Switch
This selects how the mic input level is to be
adjusted.
☞
“Recording Acoustic Instruments or Vocals” (Page 40),
“Adjusting the Input Level Automatically (Auto Level
Function)” (Page 43)
LINE/PHONO IN Jacks
Connect an electronic piano, keyboard, cassette
deck, etc. to these jacks.
☞
“Recording an Electronic Instrument” (Page 49),
“Recording a Cassette or MD” (Page 52)
LINE OUT Jack
Use this jack to output analog audio signals to an
external speaker system or electronic piano.
☞
“Connecting External Speakers” (Page 126)
You can choose the audio signal that will be output
from the LINE OUT jack.
☞
“Selecting the Audio Source that’s Sent from the LINE
OUT Jack” (Page 127)
PHONES Jack
You can connect a set of headphones to this jack.
* If headphones are connected, there will be no sound
from the speakers.
☞
Step 4 on “Recording with the Internal Mics” (Page
40)
fig.unit03.eps
AC Adaptor Connector
Connect the dedicated AC adaptor (included) here.
☞
“Using the Dedicated AC Adaptor” (Page 21)
Cord Hook
Use this cord hook to fasten the cord of the
dedicated AC adaptor (included) so that it doesn’t
become accidentally unplugged.
☞
“Using the Dedicated AC Adaptor” (Page 21)
Security Slot ( )
http://www.kensington.com/
Battery Cover
☞
“Using Batteries” (Page 23)
Battery Compartment
Install batteries here if you want to operate the
CD-2i on batteries.
If you’re using the dedicated AC adaptor, it’s not
necessary to install batteries.
☞
“Using Batteries” (Page 23)
Switch
position
Explanation
MANUAL
The [MIC] knob will adjust the mic’s
input level.
AUTO The mic input level will be adjusted
automatically. Operating the [MIC]
knob will not affect the input level.
Rear Panel/Bottom Panel
You must turn off the power before performing the
following operations.
●
Switching from operation with the dedicated
AC adaptor to battery operation
●
Switching from battery operation to operation
with the dedicated AC adaptor
Note
CD-2i_e.book 17 ページ 2010年3月15日 月曜日 午前10時15分