40
Chapitre 6 Appendices
●Pitch Bend Change
STATUS SECOND THIRD
EnH llH mmH
n=MIDI Channel Number: 0H - FH (ch.1 - ch.16)
mm,ll=Value: 00H, 00H - 7FH, 7FH (-8192 - +8191)
■Channel Mode Message
●All Note Off
STATUS SECOND THIRD
BnH 7BH 00H
n=MIDI Channel Number: 0H - BH (ch.1 - ch.12)
* Can be received only through the Basic channel
* Turn off all notes that are now on.
●OMNI OFF
STATUS SECOND THIRD
BnH 7CH 00H
n=MIDI Channel Number: 0H - BH (ch.1 - ch.12)
* Can be received only through the Basic channel.
* Will act the same as All Note Off.
●OMNI ON
STATUS SECOND THIRD
BnH 7DH 00H
n=MIDI Channel Number: 0H - BH (ch.1 - ch.12)
* Can be received only through the Basic channel.
* Will act the same as All Note Off.
●MONO
STATUS SECOND THIRD
BnH 7EH mmH
n=MIDI Channel Number: 0H - BH (ch.1 - ch.12)
mm=Number of Individual Channels: 00H - 10H (0 - 16)
* Can be received only through the Basic channel.
* Will act the same as All Note Off.
●POLY
STATUS SECOND THIRD
BnH 7FH 00H
n=MIDI Channel Number: 0H - BH (ch.1 - ch.12)
* Can be received only through the Basic channel.
* Will act the same as All Note Off.
■System Realtime Message
●Active Sensing
STATUS
FEH
* Having received this message, the GR-20 expects to receive information of any status of
data during about 420msec.If the GR-20 doesn’t receive any message during that time, it
acts as if the All Note Off message is received, and returns to normal operation (will not
check interval of messages).
■System Exclusive Message
STATUS SECOND THIRD
F0H iiH ddH eeH F7H
F0H: System Exclusive
ii = ManufacturerID: 41H (65)
dd ......ee = Data: 00H - 7FH (0 - 127)
F7H: EOX (End Of Exclusive)
* For more details, refer to the page of “Roland Exclusive message” and Section 3 or after.
2. Transmitted Data
■Channel voice messags
●Note Off
STATUS SECOND THIRD
9nH kkH 00H
n=MIDI channel Number: 0H - FH (ch.1 - ch.16)
kk=Note Number: 00H - 7FH (0 - 127)
●Note On
STATUS SECOND THIRD
9nH kkH vvH
n=MIDI Channel Number: 0H - FH (ch.1 - ch.16)
kk=Note Number: 00H - 7FH (0 - 127)
vv=Velocity: 01H - 7FH (1 - 127)
●Control Change
❍Bank Select
STATUS SECOND THIRD
BnH 00H mmH
BnH 20H llH
n=MIDI Channel Number: 0H - FH (ch.1 - ch.16)
mm,ll=Bank Number: 00H, 00H - 0AH, 00H
❍Foot Type
STATUS SECOND THIRD
BnH 04H vvH
n=MIDI Channel Number: 0H - BH (ch.1 - ch.12)
vv=Control Value: 00H - 7FH (0 - 127)
* When the Expression pedal is operated with EXP TYPE = “FL”, “EF”, the GR-20 sends
this as the operation.
❍Data Entry
STATUS SECOND THIRD
BnH 06H mmH
BnH 26H llH
n=MIDI Channel Number: 0H - FH (ch.1 - ch.16)
mm,ll=the value of the parameter specified by RPN
❍Volume
STATUS SECOND THIRD
BnH 07H vvH
n=MIDI Channel Number: 0H - FH (ch.1 - ch.16)
vv=Volume: 00H - 7FH (0 - 127)
* Transmitted the total volume fixed with expression pedal and GK PU operation.
