Using the HDR 145
10
Adjusting the balance
The balance control allows for right/left volume adjustment.
Adjust the balance so that you hear equally well with both
ears.
̈ Turn the balance control 4 to the left L or right R in order
to increase the volume for the corresponding ear. There is a
click-stop in the center position.
Switching the acoustic signals (beeps) on and off
An overview of the acoustic signals is given on page 5. The
acoustic signals can be switched on and off as follows:
̈ Switch the headphones on (see page 8).
̈ Press the TUNE button 3 for 5 seconds.
̈ Switch the headphones off for testing (see page 8).
If the acoustic signals are switched on, the headphones
produce a sequence of three beeps at switch-off. If no
beeps are produced, the acoustic signals are now switched
off.
The setting for the acoustic signals is retained in
memory until you change the setting again or replace
the rechargeable batteries.
