58
2. EDGE ERASE COPYING
If the edges of an original are torn or dirty, they are reproduced as black stains on the copy.
In the edge erase mode, a white border will be created along the all edges of the copy eliminating
the marks. The default edge erase margin is 5 mm, but you can select any margin within the
range of 5 to 20 mm.
Example of Edge Erase Copying
Press the EDIT key to enter the Editing
menu.
. The menu on the right appears.
1
Procedure
Press the EDGE ERASE key to select the
edge erase function.
2
Original
Edge-erased copy
How to Change the Edge Erase Margin
. To change the edge erase margin, press the
5mm or 20mm key to select the desired
edge erase margin.
. If the settings are OK, press the SET key.
Notes:
. The edge erase margin changes at increments
of 1 mm on the front and rear sides.
. About 45 seconds after copying, the edge
erase margin returns to the default 5 mm.
