Model PN-655RU
LCD element 65" wide (163.9 cm diagonal) ASV low-reflection black TFT LCD
Max. resolution (pixels) 1920 x 1080
Max. colors 16.77 M colors (8 bits/color)
Pixel pitch 0.744mm (H) x 0.744mm (V)
Viewing angle 170° right/left/up/down (contrast ratio ≥10)
Screen active area inch (mm) 31-5/8(H) x 56-1/4(V) (804 X 1428)
Computer input signal Analog RGB (0.7Vp-p) [75Ω], Digital (DVI 1.0 standard-compliant)
Sync signal Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
Video color system PAL, PAL-60, SECAM, NTSC (3.58MHz), NTSC (4.43MHz)
Plug and play VESA DDC2B
Power management VESA DPMS, DVI DMPM
Input terminals Computer signal Analog Mini D-sub 15 pin, 3 rows x 1
Digital DVI-D 24 pin x 1
Computer audio 3.5 mm mini stereo jack x 1
Serial (RS-232C) D-sub 9 pin x 1
Composite video BNC x 1
Component BNC(Y, Cb/Pb, Cr/Pr) x 1
Audio RCA pin (L/R) x 1
Output terminals Computer signal Digital DVI-D 24 pin x1
Serial (RS-232C) D-sub 9 pin x 1
Audio RCA pin (L/R) x 1
Speaker 10 W + 10 W [6Ω]
Power requirement AC 120 V, 60 Hz
Operating temperature 32°F to 104°F(0°C to 40°C)
Operating humidity 20% to 80% (no condensation)
Power consumption 560 W (Input signal waiting mode: 1.5 W, Standby mode: 1.5 W)
Dimensions inch (mm) Approx. 36-5/16 x 5-7/8 x 61-7/8 (923 x 150 x 1,572) (excluding protrusions)
Weight lbs. (kg) Approx. 145.5 (66)
As a part of our policy of continuous improvement, SHARP reserves the right to make design and
values in individual units.
This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support
the same standard in order for the monitor’s power management function to work.
