A SERVICE OF

logo

The Timer18
EN
CFD-360.E.G_3-000-000-1X.CED/CEE/CEK/EE1
Setting the clock
Before you set the clock, insert four R6
(size AA) batteries and connect the AC
power cord (see page 22.)
Before you set the clock, “0:00” flashes.
The Timer
Tip
The time display
system:
24-hour system
1 Press CLOCK/TIMER until “CLOCK” appears in
the display.
2 Press CLOCK/TIMER for about 2 seconds until
the hour digit flash.
3 Press TUNING/TIME SET +/– until you set the
current hour. Then press DISPLAY/ENTER.
The minute digits flash. Set the minutes by
pressing TUNING/TIME SET +/– until the correct
minute is displayed.
4 Press DISPLAY/ENTER.
The clock starts from 00 seconds.
CLOCK/TIMER
TUNING/TIME SET +/–DISPLAY/ENTER
/