Optional Components
35
GB
Notes
• When playing MP3 files, sound is not output from
the DIGITAL OUT (OPTICAL) jack.
• You can record digital audio from this system only
when DVD function is selected.
• You cannot make a digital recording of a copy
guarded disc using a digital component connected to
this system. Also, playback may not be possible
depending on the connected component.
• When you connect a component that does not support
Dolby Digital or DTS to the DIGITAL OUT
(OPTICAL) jack and output a Dolby Digital or DTS
bit stream, noise may be heard from the connected
component.
1 Connect a digital optical cord.
See “Hooking up optional components”
(page 34).
2 Connect 6 speakers to an AV amplifier
equipped with a decoder.
For the speaker placement, refer to the
operating instructions supplied with the
connected amplifier.
3 Press SETUP in stop mode.
The Setup Menu appears.
4 Press < or , repeatedly to select
“Audio Setup Page,” then press
ENTER.
5 Press M or m repeatedly to select
“SPDIF Setup,” then press ENTER.
“SPDIF Output” appears.
6 Press ENTER.
7 Press M or m repeatedly to select
“SPDIF/RAW,” then press ENTER.
8 Press SETUP to turn off the Setup
Menu.
9 Switch the output to 5.1 channel Dolby
Digital sound or 5.1 channel DTS
sound.
See “Changing the sound” (page 20).
Enjoying the 5.1 channel
sound with the optional
amplifier
